alkapast

Alkaline cleaning paste. Extracts dirt (oil, grease) from porous flooring. Also suitable for vertical surfaces.

Highly effective, concentrated cleansing paste for the removal of coats (dispersions and dry-bright emulsions) from floors. Removes also organic dirt. Thanks to its special mixture and its configuration, the drying paste absorbs dirt from porous materials like concrete and masonry. This “blotting paper” effect supports the removal of oil stains from concrete and of graffiti from walls. The product can be used for many other purposes. Alkaline. The organic components are degradable. The inorganic components are completely eliminated. Necessarily test the product suitability before use (see “Special advice”).


Application areas

For all washable, alkali-resistant materials and floor coverings like natural and synthetic stone, hard concrete, terracotta slabs, clinker bricks, plastic, rubber and xylolite.


Dosage

Apply the undiluted product with a spatula or bricklayer’s trowel in a fine coat.


Instructions for use

Allow to act after the application.
Find out the optimal drying time by trial and error (approximately 1 hour).
Remove residues mechanically or wash away.


Product consumption

200 – 300 g per m2 and per coat


Special advice

Not suitable for asphalt and linoleum (discoloration).
Test surface and dirt compatibility in an inconspicuous place before use.
Do not treat too large surfaces at a time.
The manufacturer declines all responsibility for damages from improper product use.


Technical data

Storage stability: at least 6 months
Storage: protect from frost / store at room temperature
pH value: 12
Ingredients: non-ionic surfactants, amines, water-soluble solvents, alkaline salts, water, thickener

Specific References