EpoxyEx

Removes and dissolves washing residues from epoxy resin grout and other grout mortar containing plastic. For removing light or heavy epoxy resin films on ceramic or porcelain. For cleaning and degreasing heavily soiled porcelain stoneware and ceramic floors.

Dosage

Use undiluted.

Instructions for use

Shake well before use!

The grout should be at least a day old. The fresher the dirt, the easier it is to remove. Apply to the surface to be cleaned with a white pad and leave on for at least 10-15 minutes. Possibly make it more liquid with a little additional water, the material should not dry out. Then work off by machine or manually with a pad or brush and absorb the material with water. Rinse with plenty of water.

Removal of old, stubborn epoxy residues:

Apply the undiluted product to the area to be cleaned, leave for 15 - 20 minutes, rub off with an abrasive pad (depending on the floor covering, from white to brown) and wash off with clear water.

Product consumption

Surface: 1l per m2 (corresponds 1 mm layer)

Spot: 200-300 ml per m2

Special advice

The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability 2 years

pH value 12

Ingredients Water, thickener, organic solvents, anionic and non-ionic surfactants, soap, alkali, abrasives