Oil and grease remover without solvents. For workshops, the machine industry and the food industry. Neutral, gentle to surfaces. Low foaming. With or without corrosion protection

with / without corrosion protection

Concentrated, low-foaming and solvent-free degreaser for floors, walls, machine parts and tools. Good emulsification of animal and vegetable fats. Does not corrode painted machine parts. Suitable for manual and machine application.

Application areas

For the engineering industry, garages, foundries, butcher’s shops, slaughterhouses, kitchens.
For all water-resistant surfaces, floors, machines, tools and covers.


Light soiling: Add 2 – 10 dl to 10 l water (2 - 10%).
Heavy soiling: Mix 1:10 up to 1:1 with water.

Instructions for use

Light soiling: Apply solution, scrub and remove soiled solution with a wet vacuum cleaner, mop or cloth.

Heavy soiling: Apply solution (possibly with a sponge clamp applicator), allow to act for 15 - 30 minutes, scrub with a machine, then remove soiled solution with a wet vacuum cleaner. Possibly rinse.

Machine parts, tools: Wash surface and rinse. Possibly wipe with a well-wrung cloth.

Product consumption

10 l solution for 30 – 100 m2

Special advice

Warm water increases the cleaning effect.
Remove the oily, soiled solution over an oil separator.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value (concentrated): 9
pH value (1% solution): 7.5
Ingredients: surfactants, phosphate, perfume, preservative, water

Specific References