Acid cleaner for porcelain stoneware. For intensive cleaning and stripping. Use ceracid, cera-clean or cerapur depending upon the type of surface and how soiled it is.

Concentrated acid intensive cleaner and stripper. Particularly suitable for machine application thanks to its low-lather properties. Also applicable with mop, bucket and sponge or cloth.

Application areas

Particularly suitable for the acid cleaning of floors made of modern, microporous, porcelain stoneware.
Also for all washable and acid-resistant hard floor coverings like hard concrete, terracotta slabs, glazed and unglazed clinker bricks, tiles, epoxy resin and acid-resistant natural and synthetic stones.


Maintenance cleaning: Add 50 – 100 ml to 10 l water (0.5 – 1%).
Machine application: Add 100 – 200 ml to 10 l water (1 – 2%).
Stripping: Add 1 – 2 l to 10 l water (10 – 20%).

Instructions for use

Maintenance cleaning: Wet wipe with a mop or microfibre cloth.
Machine application: Apply solution. Scrub. Remove soiled solution with a wet va-cuum cleaner (direct method).
Stripping: Apply solution. Allow to act for 5 - 10 minutes. Scrub. Remove soiled solution with a wet vacuum cleaner (indirect method).

Product consumption

10 l solution for 80 - 100 m2.

Special advice

Test the acid-resistance of unknown floor coverings before cleaning.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value (concentrated): 1.0
pH value (solutions): 2
Ingredients: surfactants, inorganic acid, dye, water

Specific References