cerapur

Concentrated, alkaline intensive cleaner and stripper, specially developed for porcelain stoneware. Removes dirt from micro-pores. Also very well suited as an industrial cleaner.

Concentrated, slightly alkaline intensive cleaner and stripper. Particularly suitable for machine application thanks to its low-foaming properties. Also applicable with mop, bucket and sponge or cloth.


Application areas

Particularly suitable for the cleaning of floors made of modern, microporous, porcelain stoneware.
Also for all washable and alkali-resistant hard floor coverings like hard concrete, terra-cotta slabs, glazed and unglazed clinker bricks, tiles, epoxy resin and natural and syn-thetic stone.


Dosage

Maintenance cleaning: Add 0.05 – 0.1 l to 10l water (0.5 – 1%).
Machine application: Add 0.1 – 0.2 l to 10 l water (1 – 2%).
Stripping: Add 1 – 2 l to 10 l water (10 – 20%).


Instructions for use

Maintenance cleaning: Wet wipe with a mop or microfibre cloth.
Machine application: Apply solution. Scrub. Remove soiled solution with a wet vacuum cleaner (direct method).
Stripping: Apply solution. Allow to act for 5 - 10 minutes. Scrub. Remove soiled solution with a wet vacuum cleaner (indirect method).


Product consumption

10 l solution for 80 - 100 m2.


Special advice

The manufacturer declines all responsibility for damages from improper product use.


Technical data

Storage stability: at least 2 years
pH value (concentrated): 13
pH value (solutions): 11 - 12
Ingredients: surfactants, solvents, alkaline salts, perfume, dye, water

Specific References

You might also like