pramaxol

Powerful cleaner for cleaning machines and industrial equipment. Excellent for cleaning hall and production floors and walls. Very good oil, rust and grease dissolving properties. Also suitable for fire damage restoration. Free of silicone and complexing agents.

Application areas

For washable surfaces and floors like PVC, natural and synthetic stone.

For all water-resistant coverings and plastic surfaces.

Dosage

Usually mix 1:5 up to 1:10 (1 - 2 l to 10 l water) with water.

For light soiling a dilution up to 1:100 (1 dl to 10 l water) is possible.

Instructions for use

Apply solution directly onto a wet sponge or cloth for manual application.

Can also be applied by mop, pressure machine or automatic cleaning machines.

Aluminum surfaces can be cleaned very easily with pramaxol solutions, although this work should only be carried out by experienced professionals.

Product consumption

10 l solution for 30 - 60 m2, depending on type of soiling, concentration and application method.

Special advice

Wash walls from the bottom to the top to avoid water streaks / runs.

Test the material and cleaning device compatibility with the product before cleaning. Not suitable for linoleum and asphalt. 

The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability at least 2 years

pH value concentrated: 12 / 1% solution: 9

Ingredients non-ionic surfactants, water-soluble solvents, amines, builders, perfume

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)