SANIPOL

For daily use in sanitary areas.

Excellent liquid cleanser for the entire sanitary area. Cleans and deodorises. Removes lime residues, urine scale and other soiling. Fats and oils are also removed.


Application areas

For all acid-resistant tiles, fittings, sanitary porcelain, chrome, chrome steel, plastics, washbasins, stoneware, rubber and grained rubber coverings.


Dosage

Apply undiluted for fittings, washbasins and objects.
Add 2 – 10 dl to 10 l water (2 -10%) for large surface areas.


Instructions for use

Suitable for manual or machine application.

Fittings, washbasins and objects: Wipe with a cloth moistened with water. Rinse with water.

Large surface areas: Apply solution. Treat stubborn incrustations with a pad. Remove soiled solution with a wet vacuum cleaner or mop. Rinse with clear water.


Product consumption

10 l solution for 40 – 120 m2.


Special advice

Moisten acid-sensitive joint material with water before the application.
Test the acid-resistance of enamel and glazed tiles in an inconspicuous place before the application.
In case of prolonged application or sensitive skin, wear gloves.
In case of eye contact, rinse with plenty of water.
Do not apply to limestone (slate, travertine, Solnhofer, marble) and synthetic stone (terrazzo).
Use white – not green (scratches on fittings!) pad sponges.
The manufacturer declines all responsibility for damages from improper product use.


Technical data

Storage stability: at least 2 years
pH value (concentrated): 1
pH value (1% solution): 2.5
Ingredients: inorganic acid, non-ionic surfactants, perfume, dye, water

Specific References