prima

Polyurethane-based thermoplastic dispersion. For stripping stone flooring. As first coat in combination with optima. Excellent cohesive properties. Long-lasting. Can also be used alone as a coating.

Polymeric dispersion for the coating of smooth natural and synthetic stone floors. Provides a tough, elastic, soil-resistant protective film. Excellent adhesion. Tread-resistant. This long-lasting coat extends the intervals between the basic cleanings. Special high shine and optimum durability are achieved through polishing with the high-speed method. Constitutes a perfect base for the application of optima and other polymeric dispersions.


Application areas

For smooth natural and synthetic stone.
Also for PVC and linoleum, where it constitutes a perfect base for the application of optima and other polymeric dispersions.


Dosage

Use undiluted.


Instructions for use

Pour the undiluted product onto the clean, stripped floor and apply with a polish applicator evenly in lanes.
Apply 1 - 2 coats, depending on the absorbency of the floor. Allow the first coat to dry.


Product consumption

30 - 50 g per m2 and coat.


Special advice

Rinse the polish applicator with water immediately after use.
Treat wax-free coverings only.
Protect from frost.
Test the compatibility of the product in an inconspicuous place before applying it on large surfaces (over 50 m2).
The manufacturer declines all responsibility for damages from improper product use.


Technical data

Storage stability: at least 2 years
Storage: do not store below 0°C
pH value (concentrated): 9
Ingredients: water-soluble organic solvents, preservative, perfume

Specific References