For the rapid machine spray dry cleaning of oiled or sealed parquet.
The product is designed for use in the dry cleaning or general cleaning of wood surfaces. Can be used with a machine to clean larger surface areas.
Dry cleaning: apply in undiluted form
Use a 10 - 20% solution for general cleaning purposes (dilute 1 - 2 litres with 10 litres water)
Instructions for use
Wet clean the floor surface in preparation for dry cleaning. Transfer the product to a spray applicator and use a pad appropriate to the level of soiling and the nature of the surface (a beige to green pad, depending on surface material). Spray the product evenly on the surface and work in by making circular movements with a single disk polisher until the floor is dry. If the pad tends to smear, it should be turned or replaced.
For general cleaning applications, use an appropriate device. Do not leave water residues on the floor surface.
It is advisable to divide extensive, broad surface areas into strips with a width of 1.5 - 2.0 metres for the purpose of processing.
Do not allow the pad to dry after use, but soak in a detergent solution and rinse well with lukewarm water.
The manufacturer accepts no liability for any damage resulting from the inappropriate use of this product.
Shelf life: at least 2 years
pH value(concentrate): 10
Composition: water-soluble organic solvents, non-ionic surfactants, additives, fragrance, water