Excellent maintenance product for oiling unsealed wood floors. Suitable for the initial treatment of absorbent or very washed-out floors.

Oil for the maintenance of oiled and non-sealed wooden floors. The high content of fully drying nurturing oils makes floors more resistant to wear. Floors become significantly more hard-wearing and less prone to soiling. The structure of the wood and its colour are accented.


For the initial treatment of non-sealed wooden floors and the maintenance of porous, oiled floors.


Apply in undiluted form.

Instructions for use

Apply approximately 1 litre to each 10 m2 floor surface and process using a normal green floor polisher pad.
Apply additional oil to areas where the wood is more absorbent.
After about 15 minutes, remove any excess oil remaining on the surface with an oil-resistant rubber squeegee.
Dry polish the surface with a white pad or textile pad. Do not tread or place weights on the surface for at least 24 hours.
Approximately 1 week will be required for the surface to fully harden.


This will be determined by the absorbency of the floor material (up to 300 ml/m2 may be required).

Important information

The manufacturer accepts no liability for any damage resulting from the inappropriate use of this product.

Safety information

There is a risk of spontaneous ignition of wood dust, textiles, polishing pads and other absorbent processing materials that have come into contact with wood-basic-oil.
These materials must be impregnated with water and transferred to an air-tight container for disposal.

Technical information

Shelf life: at least 2 years
Storage: store at room temperature in the sealed original container.
Composition: oils, organic solvents

Specific References