wood-refresher

For the care of oiled wooden floor coverings and the maintenance of hard, less absorbent woods, such as oak, bamboo etc.

Dosage

Apply sparingly in undiluted form.

Instructions for use

Apply approximately 1 litre to each 10 m2 floor surface and process using a normal green floor polisher pad.
Apply additional oil to areas where the wood is more absorbent.
After about 15 minutes, remove any excess oil remaining on the surface with an oil-resistant rubber squeegee.
Dry polish the surface with a white pad or textile pad. Do not tread or place weights on the surface for at least 24 hours.
Approximately 1 week will be required for the surface to fully harden.

Important information

Shake before use. The manufacturer accepts no liability for any damage resulting from the inappropriate use of this product.

Safety information

There is a risk of spontaneous ignition of wood dust, textiles, polishing pads and other absorbent processing materials that have come into contact with wood-refresher.
These materials must be impregnated with water and transferred to an air-tight container for disposal.

Technical information

Shelf life: at least 2 years
Storage: store at room temperature in the sealed original container.
Composition: waxes, oils, organic solvents