CleanMulti forte

Thorough cleaner to remove oil, fat and wax soiling of every kind. This product is suitable for commercial kitchens, industry and garages and enables effortless cleaning for walls, machines, ventilations, deep fryers and floors. This product is strong because of its high alkaline content.

Application areas

For washable surfaces and floors such as PVC, natural and synthetic stone.
For all waterproof and alkaline resistant synthetic surfaces and covers.

Dosage

Usually 1:5 to 1:10 (1-2 liters for 10 liters solution).
For light soiling, a dilution of 1:100 is possible (1 dl to 10 l water).

Instructions for use

For manual maintenance cleaning, apply solution to a wet sponge or cloth.
Also applicable with high-pressure unit, mop device or cleaning machine.
Aluminum surfaces can easily be cleaned with CleanMulti, this however should only be done by an expert.
This product is terrific to dissolve greasy surfaces. Protect your hands, skin and eyes.
The product is only limited suitable and should only be applied by an expert on aluminum.

Product consumption

Depending on the soiling, concentration and method: 10 liters of solution for 30 – 60 m².

Instructions for use

Wash walls from the bottom to the top to avoid water streaks/runs.
Test the product on the materials, as well as on the cleaning devices used before application to surfaces to determine if the product dosage is suitable.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH-value (concentrated): 13 – 14
Ingredients: non-ionic surfactants, water-soluble solvents, amines, complexing agents, builders, perfume water

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)