ecofloor polymer

Easy to wipe, clean and polish. The optimised, water-soluble polymers produce a natural sheen that is easy to polish. Does not form layers or ridges. Conforms to DIN 18032-2.

Freshly scented cleaning and maintenance concentrate. Leaves a shiny and self-care polishable film, no layer build-up. Meets DIN 18 032, section 7.5 " Gleitsicherheit ". For all water-resistant coated and uncoated floor coverings.

Application areas

For all washable floor coverings like plastic, PVC, linoleum, Colovinyl, natural and synthetic stone, rubber and epoxy resin.

Ecofloor polymer is a product for versatile applications:
- economical wet mopping
- thorough spray cleaning
- automatic scrubber use.

Instructions for use

Wet mopping: Add 40 - 80 ml to 8 l water. Apply solution with a wet mop, allow to act briefly, remove soiled solution and allow floor to dry. Buffing increases the protective film's shine and tread resistance.

Spray cleaning: Use undiluted or 1:1.

Spot spray cleaning: Spray product onto the soiled floor areas and treat with a single disc machine and buffing pad. After a short time, buff the cleaned surface areas.

Full spray cleaning: Clean large surfaces in lanes of 2 - 2.5 m width by spraying the product evenly onto the floor. Treat the sprayed section with a single disc machine, and then buff.

Automatic scrubbers: 40 - 80 ml to 8 l water.

Special advice

Not suitable for unsealed wood and unsealed cork floors.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value (concentrated): 9
pH value (1% solution): 7.5
Ingredients: nonionic surfactants, preservative, dye, perfume, water

Specific References