Reiniger M-80

Specifically suited for cleaning machines. Also well-tried as a strong general-purpose cleaner for industrial use for hall and workshop floor cleaning. Can be used manually, in high-pressure cleaning machines or scrubbing machines.

Powerful cleanser for the cleaning of machines and for general cleaning in industrial sites. extraordinarily suitable for the cleaning of hall and workshop floors. Dissolves and emulsifies dirt and prevents from corrosion.

Application areas

For washable surfaces and floors like PVC and natural and synthetic stone.
Also for tiles, fittings, sanitary porcelain, chrome and chrome steel.


Usual dilution 1:5 up to 1:10 with water (1 – 2 l in 10 l water).
A dilution of 1:100 (1 dl in 10 l water) can be used for light soiling.

Instructions for use

Apply the solution onto a wet sponge or cloth for manual maintenance cleaning.
Can also be applied with high pressure unit, mop, or automatic scrubber.

Product consumption

Depending on the degree and type of soiling, solution concentration and application method: 10 l solution for 30 – 60 m2.

Special advice

Wash walls from the bottom to the top to avoid water streaks / runs.
Test material / product compatibility with the intended product concentration / solution in an inconspicuous place before use.
Not suitable for use on linoleum floors.
The product is a powerful cleanser.
Protect hands, skin and eyes.
Observe the EU safety data sheet.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value (concentrated): 11.5
pH value (1% solution): 9.5
Ingredients: non-ionic surfactants, water-soluble solvents, amines, complexing agent, builders, perfumes, water

Specific References