turbolino

Fast-acting stripper for removing dispersions and emulsions. Specifically for linoleum and other alkali-sensitive floor coverings.

Dissolves old wax and plastic coats fast and completely. Highly active, concentrated stripper for the removal of dispersions and dry-bright emulsions. Removes also other types of soiling.


Application areas

Especially for linoleum floors, but also for floor coverings like plastic, PVC, epoxy resin, rubber, Colovinyl and xylolite.


Dosage

Add 1 – 2 l to 10 l water (10 - 20%).

For general cleaning and the removal of heavy soiling:
Add 0.5 – 1 dl to 10 l water (0.5 - 1%).


Instructions for use

Apply solution.
Allow to act for 2 – 5 minutes.
Scrub and remove soiled solution with a wet vacuum cleaner or mop.


Product consumption

10 l solution for 30 – 50 m2.


Special advice

Immediately remove any drops or splashes from painted / lacquered surfaces and skirting (baseboards) with water.
Rinse floor with clean water if it is coated after the treatment.
Product does not change colours of linoleum floors.
Note instructions on the EU safety data sheet.
The manufacturer declines all responsibility for damages from improper product use.


Technical data

Storage stability: at least 2 years
pH value (concentrated): 10.5
pH value (1% solution): 9
Ingredients: anionic and non-ionic surfactants, NTA, water-soluble organic solvents, phosphates, perfume, water

Specific References