Low foaming stripper for linoleum. Does not leach the floor covering. Does not cause discolorations. Easy to use on all alkali-sensitive floor coverings.

Highly active, concentrated stripper for the removal of acrylic dispersion and dry-bright emulsion layers. Removes effectively all types of soiling.

Application areas

Especially for linoleum floors, but also for other floor coverings like plastic, PVC, epoxy resin, rubber, Colovinyl and xylolite.


Add 0.5 – 2 l to 10 l lukewarm water (5 - 20%).

For general cleaning and the removal of heavy soiling:
Add 2 – 5 dl to 10 l water (2 - 5%).

Instructions for use 

Apply solution.
Allow to act for approximately 10 minutes.
Scrub and remove soiled solution with a wet vacuum cleaner or mop.

Product consumption

10 l solution for 30 – 50 m2.

Special advice

Immediately remove any drops or splashes form painted / lacquered surfaces and skirting (baseboards) with water.
Rinse if the floor is coated after the treatment.
Product does not change colours of linoleum floors.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
Storage: -
pH value (concentrated): 10
pH value (1% solution): 8.5
Ingredients: surfactants, perfume, water-soluble organic solvents, water, alcohols

Specific References