strip-forte
High-performance cleaning concentrate for the easy removal of emulsions, dispersions, wax coatings and other heavy soiling on all water-resistant and alkali-resistant flooring.
Highly effective concentrated floor stripper for the removal of acrylic dispersion and dry-bright emulsion layers. Also removes effectively other types of soiling. Alkaline.
Application areas
For all washable floor coverings like plastic, PVC, hard concrete, terracotta tiles, clinker bricks, natural and synthetic stone, rubber and xylolite.
Dosage
Add 0.5 – 2 l to 10 l lukewarm water (5 - 20%).
Heavy incrustations: Add 2 – 5 dl to 10 l water (2 - 5%).
Instructions for use
Apply solution.
Allow to act for approximately 15 minutes.
Scrub, possibly use a blue or brown pad.
Remove soiled solution with a wet vacuum cleaner or mop.
Product consumption
10 l solution for 30 – 50 m2.
Special advice
Immediately remove any splashes on lacquered or painted surfaces or plinths with plenty of water.
Rinse with clean water if a coat is applied after the treatment.
Not suitable for linoleum (discoloration) and asphalt.
The manufacturer declines all responsibility for damages from improper product use.
Technical data
Storage stability: at least 2 years
pH value (concentrated): 12
pH value (10% solution): 11
Ingredients: surfactants, amines, alkaline salts, perfume, water
Specific References
High-performance cleaning concentrate for the easy removal of emulsions, dispersions, wax coatings and other heavy soiling on all water-resistant and alkali-resistant flooring.