cemex forte

Extremely powerful acid cleaner for easy removal of cement residues and limescale or lime efflorescence, even in severe cases.

Extremely powerful acid cleaner for easy removal of cement residues and limescale or lime efflorescence, even in severe instances.


Application areas

Can be readily used on clay tiles, clinker bricks, stone tiles, granite and quartzite.


Dosage

Dilute 1:1 with water. Use in undiluted form to remove stubborn soiling.


Instructions for use

Thoroughly wet the surface to ensure that the grouting is sufficiently wet.
Apply the solution (only small areas at a time) and allow to take effect.
Mechanical or manual scrubbing with a brush increases the efficacy and speed of the cleaning effect.
Remove the soiled solution with a wet vacuum cleaner or cloth. Rinse generously with water.
Remove the rinsing water with a wet vacuum cleaner or cloth.


Special advice

Always test the material for resistance to acid and colourfastness. The material is not suitable for treatment if, when the acid solution is applied to a clean tile, effervescence or colour changes occur or sheen is impaired.
In particular, do not use on calcareous stone floors (e.g. terrazzo, slate, travertine, Solnhofen tiles and marble).
Do not allow the solution to come into contact with metal. Test metal floor coverings for compatibility.
Rinse treated surfaces with water until the rinse water has a neutral pH.
Ensure good room ventilation during the use of this acid product.
Rinse splashes of the solution from metal parts with plenty of water.
The manufacturer accepts no liability for any damage resulting from the inappropriate use of this product.


Precaution

The product can cause irritation on eye contact or prolonged skin contact.
In case of eye contact, rinse immediately with plenty of water and seek medical advice.
Keep out of the reach of children.


Technical data

Minimum shelf life: 2 years
pH (in concentrated form): 0.5/1% solution: 1.5
Constituents: Inorganic acids, water

Specific References